[Sticky] News & Announcements (The Complete Guide to Creating Autodesk Revit Families)  

Page 2 / 3 Prev Next
  RSS
(@mts1809)
New Member Member

Dear Ian,

Currently only Module 1, Unit 1 PDF is available. when other Units  and Modules will be available.

Regards,

MTS

 

 

ReplyQuote
Posted : 22/04/2018 7:59 am
 Ian
(@ian)
Honorable Member Admin

Module 2: Unit 2 now available

Kind regards,

Ian

ReplyQuote
Posted : 23/04/2018 9:11 pm
 Ian
(@ian)
Honorable Member Admin
Posted by: mts1809

Dear Ian,

Currently only Module 1, Unit 1 PDF is available. when other Units  and Modules will be available.

Regards,

MTS

 

 

Hi,

Just hit the green "Mark as Completed" button at the bottom of the first Unit- this will then allow access to the next one. And so forth.

Kind regards,

Ian

ReplyQuote
Posted : 23/04/2018 9:12 pm
 Ian
(@ian)
Honorable Member Admin

Module 2: Unit 3 now available

Videos coming very soon. If you have any feedback or questions that may influence the final output of the videos- please let me know soon, so that it can be incorporated.

Many thanks,

Kind regards,

Ian

ReplyQuote
Posted : 24/04/2018 11:17 pm
 John
(@bcbcad)
New Member

Hi Ian,

Just a quick heads up on the latest release - Module 02, Unit 03.

The bottom blue arrow in the diagram at the top of Page 1 should be red.

Best regards.

John

ReplyQuote
Posted : 25/04/2018 11:23 am Ian liked
 Ian
(@ian)
Honorable Member Admin
Posted by: John

Hi Ian,

Just a quick heads up on the latest release - Module 02, Unit 03.

The bottom blue arrow in the diagram at the top of Page 1 should be red.

Best regards.

John

Many thanks for this John,

I'll get this changed within the next couple of hours and upload a V02 PDF.

Thanks once again,

May I take the opportunity to ask: Is it all making sense / clear so far?

Cheers,

Kind regards,

Ian

ReplyQuote
Posted : 25/04/2018 11:29 am
 Ian
(@ian)
Honorable Member Admin
Posted by: Ian
Posted by: John

Hi Ian,

Just a quick heads up on the latest release - Module 02, Unit 03.

The bottom blue arrow in the diagram at the top of Page 1 should be red.

Best regards.

John

Many thanks for this John,

I'll get this changed within the next couple of hours and upload a V02 PDF.

Thanks once again,

May I take the opportunity to ask: Is it all making sense / clear so far?

Cheers,

Kind regards,

Ian

Image corrected, new PDF produced and uploaded to the Unit.

Many thanks,

Ian

ReplyQuote
Posted : 25/04/2018 12:45 pm
 Ian
(@ian)
Honorable Member Admin

Module 2: Unit 4 now available

Is it all making sense so far guys?

Many thanks,

Kind regards,

Ian

ReplyQuote
Posted : 30/04/2018 9:55 pm
 Ian
(@ian)
Honorable Member Admin

Module 2: Unit 5 now available

Many thanks,

Kind regards,

Ian

 
ReplyQuote
Posted : 08/05/2018 10:05 pm
 Ian
(@ian)
Honorable Member Admin

Module 2: Unit 6: Creating Family Types is now available

Many thanks,

Kind regards,

Ian

ReplyQuote
Posted : 09/05/2018 4:46 pm
(@nascad)
New Member Member

Thanks for your tutorials.

Just some suggestions that I would find helpful:

1. On web page include module and unit name with title of lesson. (It is in the PDFs, but would help when navigating back and forth on the web page.)

2. In Module 2 Unit 4 - maybe a quick mention of which template should be used for the exercise (Generic Model) for following along. (I did find it mentioned in Module 2 Unit 3, but got to Unit 4 and didn't realize I was supposed to remember it.)

3. Maybe I missed it, but I could not find where EQing the dimensions was mentioned. First shows up in Module 2 Unit 4. (Not a big deal unless one is not familiar with it.)

Thanks

ReplyQuote
Posted : 14/05/2018 9:04 pm
 Ian
(@ian)
Honorable Member Admin
Posted by: nasCAD

Thanks for your tutorials.

Just some suggestions that I would find helpful:

1. On web page include module and unit name with title of lesson. (It is in the PDFs, but would help when navigating back and forth on the web page.)

2. In Module 2 Unit 4 - maybe a quick mention of which template should be used for the exercise (Generic Model) for following along. (I did find it mentioned in Module 2 Unit 3, but got to Unit 4 and didn't realize I was supposed to remember it.)

3. Maybe I missed it, but I could not find where EQing the dimensions was mentioned. First shows up in Module 2 Unit 4. (Not a big deal unless one is not familiar with it.)

Thanks

Hi,

MANY thanks for the Feedback. On the points you raise:-

1) Excellent idea: I'll ge these added today.

2) Yes: I may add it the intro Unit- eg, "Unless advised otherwise, all examples are based on the Generic Model Template"

3) Good point. It is in the Beginners Course- I'll probably make reference back to the Unit where that is described in detail.

Many thanks once again- it is this kind of feedback that I'm hoping for- so it can also get encapsulated in the videos- which are difficult to change once produced. Videos coming this week, by the way.

Thanks once again,

Kind regards,

Ian

ReplyQuote
Posted : 21/05/2018 2:42 pm
 Ian
(@ian)
Honorable Member Admin

Hi guys- apologies for the delay in the material- please check the last Unit available for more detail on this. However....

Module 2: Unit 7: Adding 2D Detail is now available for you to download.

The next Unit will be available tomorrow.

Kind regards,

Ian

ReplyQuote
Posted : 11/06/2018 2:37 pm
 Ian
(@ian)
Honorable Member Admin

Module 2: Unit 8: Configure Visibility Settings  is now available for you to download.

ALSO: In this Unit, you'll find a link to download the compiled PDF Ebook to date- ie all Units to date , with hyperlinked Index sheet, etc.

The next Unit will be available tomorrow- 'really going to be picking up the pace now.

Kind regards,

Ian

ReplyQuote
Posted : 24/06/2018 2:12 am
 Ian
(@ian)
Honorable Member Admin

Module 2: Unit 9  is now available for you to download.

Module 3: Unit 1  is now available for you to download.

Module 3: Unit 2 is now available for you to download.

Module 3: Unit 3 is now available for you to download.

Module 3: Unit 4  is now available for you to download.

Kind regard,

Ian

ReplyQuote
Posted : 25/06/2018 1:42 am
Page 2 / 3 Prev Next
Share: